Self-Adhesive Heating Foil for Mirrors – TERMOFOL Ireland
Eliminate bathroom mirror fogging once and for all with TERMOFOL’s self-adhesive heating foil. Designed for Irish homes, this smart solution gently warms the mirror surface, preventing steam buildup after hot showers or baths. Easy to install, maintenance-free, and energy-efficient – simply connect to your light switch. Ideal for both wall-mounted and built-in mirrors.
Clear Your View with a Heating Foil Under Mirror
Eliminate bathroom mirror fogging once and for all with TERMOFOL’s premium self-adhesive heating foil under mirror. Importantly, designed specifically for modern Irish homes, this smart solution gently warms the glass surface. Furthermore, it actively prevents steam buildup after hot showers or relaxing baths, ensuring you always have a crystal-clear reflection.
How the Anti-Fog System Works
Specifically, our innovative defogger pad applies a mild, safe heat directly to the back of your mirror. Because the temperature of the glass rises slightly above the room's temperature, condensation simply cannot form. Consequently, you will never have to wipe down a wet, streaky mirror with a towel again. In addition, this setup is completely maintenance-free and highly energy-efficient.
Simple Installation for Any Bathroom
Moreover, setting up the heating foil under mirror is incredibly straightforward. The self-adhesive backing attaches securely to the glass. Therefore, it is ideal for both traditional wall-mounted frames and sleek built-in mirrors. Additionally, your electrician can easily connect the foil directly to your bathroom light switch, meaning it only turns on when you actually need it.
Complete Your Modern Bathroom Experience
Finally, upgrading your daily routine has never been easier. By installing a heating foil under mirror, you add a touch of luxury to your home. Specifically, we recommend pairing this system with our electric heating mats for ultimate bathroom comfort. For official electrical safety guidelines regarding wet zones, please refer to the Safe Electric Ireland website.
SPECIFICATION OF THE MIRROR HEATING FOIL
Looking for a reliable anti-fog solution for your bathroom mirror? TERMOFOL self-adhesive mirror heating foils offer a modern, energy-efficient way to keep your mirror clear after showers or baths. Available in multiple sizes and power options, our foils are easy to install and perfect for Irish bathrooms. Simply connect them to your light switch – no thermostat needed. Designed to be slightly smaller than the mirror surface for optimal performance.
| Model | Dimensions | Power | Ohms | Voltage | Amps |
|---|---|---|---|---|---|
| TF-AF-R45 | Ø 450 mm (Round) | – | – | – | – |
| TF-AF-1 | 400×400 mm | 30 W | 1.76 kΩ | 230 V | 130 mA |
| TF-AF-2 | 400×600 mm | 44 W | 1.20 kΩ | 230 V | 191 mA |
| TF-AF-5 | 540×800 mm | 88 W | 382 Ω | 230 V | 601 mA |
How to Install Mirror Heating Foils – Step-by-Step Guide for Ireland
Installing mirror heating foils is a simple and effective way to prevent your bathroom mirror from steaming up. Here’s how to install the foil safely and correctly in Irish homes:
Gently remove the protective film from the mirror heating foil. Take care not to damage the surface, as it could impact performance or cause an electrical issue.
Stick the heating foil to the back of the mirror, on the side that will be mounted against the wall. The foil comes with built-in self-adhesive backing, so no additional glue or tape is required.
Ensure the foil is applied smoothly and evenly, avoiding any wrinkles or air bubbles. Leave a small margin free around the mirror edges – the heating foil should not cover the entire surface.
Use mounting adhesive (sold separately) to seal the mirror edges not covered by the foil.
Next, connect the foil to the 230V power supply. This must be done by a qualified electrician in Ireland. For safety, a hole must be drilled in the correct location to route the power cable.
Important: Never attempt electrical installation yourself. It must be carried out by a certified professional to comply with safety standards in Ireland.
Finally, attach the mirror securely to the wall.
We recommend watching the step-by-step installation video provided on our website. Detailed written instructions come with every mirror heating foil purchased.
If you have any questions about installation or require technical advice, our experienced team in Ireland is always here to help.
Yes, the foil has a layer of self-adhesive tape and is ready for installation after purchase.
No, the dimensions are fixed and it is forbidden to shorten the product. It would then be unusable or present a serious fire or electric shock hazard.
In the same way as a mirror without heating foil – stick it to the wall with mounting adhesive.
Yes, you can stick the foil yourself. Installing a mirror on the wall can also be done without the help of professionals. However, you should not connect the product to the electrical installation yourself if you do not have the appropriate permissions.
When selecting the heating foil to match the size of the mirror, allow for installation distances of at least 10 cm from the edges of the mirror. For example, for a mirror measuring 60 × 60 cm, we choose a foil measuring 40 × 40 cm.
The heating foil under the mirror has a protection class of IP54. This means that the mirror heating mat is made in a way that protects it against dust and water.
We recommend purchasing directly from the manufacturer in our online store.
-
Mirror Heating Films
Mirror Heating Film 40×40 cm — Square Anti‑Fog Heating Pad for Bathroom Mirrors | TERMOFOL
€75.00 (inc. VAT) Order -
Mirror Heating Films
Mirror Heating Film 40×60 cm — Rectangular Anti‑Fog Heating Pad for Bathroom Mirrors | TERMOFOL
€80.00 (inc. VAT) Order -
Mirror Heating Films
Mirror Heating Film Ø450 mm — Round Anti‑Fog Heating Pad for Bathroom Mirrors | TERMOFOL
€85.00 (inc. VAT) Order -
Mirror Heating Films
Mirror Heating Film 54×80 cm — Large Rectangular Anti‑Fog Heating Pad | TERMOFOL
€250.00 (inc. VAT) Order

